VISPROX Pad Printing Inks

Multiplast 300 Padprinting Ink .

Gloss finish, jet drying pvc ink for the printing of practically all pvc materials, such as self-adhesive vinyls, softened types of vinyl, acrylics, ABS, coated polyester and other synthetic materials.

The inks are suitable for machine- and hand printing, but can also be used for pad printing.

The Multiplast 300 offers an excellent outdoor resistance, and it is both petrol resistant and plasticiser resistant. The Multiplast 300 ink dries by evaporation of the solvents. Drying in racks, the ink is touch dry after 5-10 minutes and for jet drying, the optimum temperature/belt speed must be found through experience. A guideline is: 15-40 sec. in a jet drier with a good aircirculation at 45-55° C.

The full colour range is in accordance with the EN 71-3 and ASTMF-963 norm for toy regulations. The Colormatic matching system enables you to match a simulation of shades according to Pantone® -, HKS-, RAL- and Visprox colours. Condition: 100T, white substrate.

Colour range: 26 standard colours, 14 high opaque colours, crystal clear, sparkling- and glitter silver, pearl base, phosphorescent, 5 white colours appropriate to marking, 11 Colormatic colours + clear, 8 transparent colours, and 4 halftone process colours + base tix.

Colour mixing

In this ink series not only the Visprox colours according to the Colormatic matching system can be obtained by using the mixing colours A-M but also colours of other matching systems.

Thinner

• Machine printing: 20 - 25% thinner 51 can be added.
• Hand printing/fine details: 20 - 25% of retarder 7 can be added.

Various other thinners can be added (see price list and techn.information).

Varnish

Varnish for credit cards. Laminating temperature: dependent on the machinery used, approx 160°C for 30 minutes. Use 20-25% Thinner 71. No other thinner or retarder are allowed .