The paint adhesion is not good enough

This problem usually occurs when the type of product being printed on is unknown or [...]

Insufficient coverage in print

It is usually a problem when a single print is made on dark material….. It [...]

Occurring of drying stains in printing

Emergence of drying stains is mainly due to the dried ink that comes to the [...]

The gaps between the lines are closing

This problem is usually observed at the pad surface before printing to the piece….. This [...]

Pubescence at the print edges

It is usually caused by the static electricity on the material. In addition, unsuitable pad [...]

Print is fuzzy or the lines are not sharp

Possible causes and solution of the problem of blurring in lines and text with imprecise [...]

Distortion-bending at print image

Distortion-bending at printing is often a problem encountered during the printing of deep or curves [...]

Adhesion of the ink to the pad surface

It is problem that arises when the pad cannot transfer the ink to the printing [...]

Rotating Pad Printing – Round Surface

Rotating Pad Printing – Round Surface [...]

Ink thickness is uneven

It is usually occur when large surfaces are printed….. It is usually seen during printing [...]